Hearing aids are small, compact devices, but can contribute to the quality of your everyday life. Because these devices are used daily, there’s a good chance that it will develop a fault eventually, especially if not maintained properly.

When your hearing aid starts to show signs of malfunction, it’s crucial to fix the issue as soon as possible. The longer the problem is left untreated, it can get worse. Besides, the problems reduce the quality of your device, which is why repairing your device asap is vital.

With that being said, you may be tempted to take the DIY approach in fixing your faulty hearing aid in Malaysia. But don’t!

However, there are a few troubleshooting steps you can follow at home to fix minor issues. Minor issues like:

 

1. No Volume or Low Volume

This issue is usually an easy fix. First of all, ensure that your hearing aids are turned on, and the battery compartment is shut. Make sure your volume control wasn’t accidentally adjusted. It could also account for a low volume.

 

2. Sound is Distorted

If you experience scratchy or distorted sounds, the on/off switch or the volume controls may be dirty. Clean the units, and press the volume controls up and down a few times.

It could also be that your hearing aids were not inserted properly, which could cause whistling, distortion, and feedback. Remove and reinsert your hearing aids to check if it solves the problem.

 

3. Wet Hearing Aids

Depending on how much water got to your device, the issue can be fixed at home. Remove the device as fast as possible and dry with a cloth.

Also, open the battery compartment and take out the batteries. If you have a hearing aid dehumidifier, it can be helpful in this situation.

Sometimes, the problem with your hearing aids can be beyond what you can handle. At such times, we recommend you take your hearing aids to a skilled and experienced audiologist in Malaysia.

Below are the reasons that your hearing aids repair should be done by a professional.

 

modern hearing aids

1. It Could be a Simple Fix You Overlooked

Sometimes, your hearing aid could require a simple fix like changing the batteries. But because you aren’t experienced, or for some other reason, you may begin to fiddle with your device, which can get the issue complicated.

Truthfully, that’s the last thing you need. Therefore, if you aren’t sure about what to do when your hearing aids start to malfunction, take your device to your audiologist.

 

2. The Device Maybe Beyond Repairs

If your device is indeed damaged, replacing the device is the only realistic solution. Therefore, trying to fix your device yourself will only be delaying the inevitable. Therefore, take your device to your audiologist for testing to check if it needs repairs or replacement.

 

3. The Hearing Aids May Not Be Faulty

If your hearing aids no longer the volume or clarity that is expected, it might not be the device. Truthfully, reduced levels of hearing can also be attributed to a growing deterioration in your condition.

The audiologist can test your device, and your hearing to see which one is the issue. Therefore, trying to fix your device yourself will limit your hopes of getting the right response.

 

4. You Could Cause More Damage

The issues with your hearing aids can be frustrating, but it could be far worse when you try to fix it with your inexperienced hands. A little mistake could break the whole device, meaning you’ll need a new one.

multiple types of hearing aid

Final Thoughts

Trying to fix a device yourself may result in bringing more harm than good, for both the device and your hearing. Therefore, to prevent buying replacements, hearing deterioration, and frequent trips to the hospital, leave your hearing aids repairs to a professional in Malaysia.

Call Now